Last Modified: 11-29-2007 1.6 A
Service Category: Vehicle Exterior Section: Lighting (ext)
Model Year: 2008 Model: Sequoia Doc ID: RM000003GQ1000X
Title: LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: DISASSEMBLY (2008 Sequoia)

DISASSEMBLY

1. REMOVE REAR COMBINATION LIGHT GASKET

(a) Remove the rear combination light gasket.

NOTICE:

  • Detach the gasket if it adheres to the body.
  • Do not reuse a removed gasket. Replace it with a new one to prevent water from entering.

2. REMOVE TAIL AND STOP LIGHT BULB

(a) Turn the tail and stop light socket and bulb, in the direction indicated by the arrow in the illustration, to remove them.

(b) Remove the tail and stop light bulb from the light socket.

3. REMOVE REAR TURN SIGNAL LIGHT BULB

(a) Turn the rear turn signal light socket and bulb, in the direction indicated by the arrow in the illustration, to remove them.

(b) Remove the rear turn signal light bulb from the light socket.